Refer to the Quick Start Guide provided in your packaging or the owners manual. This will provide easy to follow instructions for the use of your new folding mobility scooter.
Step 1.
Pull the unfolding ring situated on the side of the scooter and carefully using two hands unfold and lower the scooter flat to the floor.
Step 2.
Gently take the weight of the seat and simultaneously pull the red release lever that is positioned under the seat, when the seat is in place the red indicators will show. There are two seat height settings so make sure you are at your desired height.
Step 3.
Fasten the chassis hooks situated in the centre of the frame. On the left and right sides by pushing the hook over the hook on the frame and pushing the backside of the hook back down.
Step 4.
Release the locking clamp on the base of the scooter. There should be a metal lever you unfold and a plastic one underneath.
Step 5.
Lift up the plastic trigger handle towards the handlebars on the side of the tiller, whilst keeping the trigger pulled out raise your tiller to the desired angle and then close the base clamp.
Step 6.
The tiller has two locking clamps on it just under the handlebars, unclip these to move tiller up and down to desired height and then close the clamps.
Step 7.
If your scooter is from the Elite range you can pull out and turn your handgrips to extend them.
